box gutters

The downpipes can be connected to each other with the pipe branch, so that a lateral inlet into a main line is possible.

Special adhesive 100 g Special adhesive for bonding Marley box and duplex gutters. The adhesive contains solvents, so the gutter adhesive can bette...

The easy-to-install rainwater collector is made of high-quality plastic and has a filter and overflow stop. It fits downpipes with a diameter of 53...

Special cleaner 100 ml The special cleaner is not intended to remove dirt, but to make the surfaces to be bonded free of grease. The gutter adhesiv...

Corrugated sheet holder galvanized, 2-piece, for gutter holders RG 100 and smaller. The corrugated and multiwall sheet holder is used for fastening...

The gutter iron is galvanized. The gutter iron must be adjusted and bent on the roof. The gutter irons are mounted at a distance of approx. 50 cm a...

The spout can be attached directly to the spigot or the DN 53 downpipe. It must be glued to the spigot or to the downpipe. Available colors:- Grey ...

The gutter iron is galvanized and plastic coated in the color of the gutter. The gutter iron must be adjusted and bent on the roof. The gutter iron...

The adjustable gutter bracket is attached to the fascia board at a distance of 50 cm from the next bracket. The following holders are aligned on a ...

The plastic gutter holder can be screwed to a fascia board or to the adjustment bracket. The mounting distance is 50 cm. The gutter holder is fixed...

The inside corner allows two box gutters to be joined at a 90° angle by bonding. Available colors:Gray, Brown, White, Anthracite, Anthracite Metallic

With the external corner, two box gutters can be connected at a 90° angle by bonding. Available colors:Gray, Brown, White, Anthracite, Anthracite M...

The spigot is used to drain rainwater into the downspout. The gutter is passed through the spigot undivided, and a hole for water drainage is sawed...

An end piece can be used to close the end of a box gutter by bonding. Gutter end pieces can be used on the left and right. End pieces are not usabl...

The connecting tray can be used to connect two box roof gutters using the adhesive method. Available colors:Gray, brown, white, anthracite, and ant...

With the Marley RG 70 box roof gutter, all gutter elements are glued together with the Marley special adhesive. The glued areas must be cleaned bef...